TLE8104EXUMA2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC Qualified |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLE8104 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Interface | SPI |
| Nominal Supply Current | 1mA |
| Output Configuration | Low Side |
| Output Current | 3A |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Drain to Source Voltage (Vdss) | 60V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Max Dual Supply Voltage | 60V |
| Min Dual Supply Voltage | 45V |
| Fault Protection | Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 10 μs |
| Output Peak Current Limit-Nom | 4.5A |
| Rds On (Typ) | 320m Ω |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLE8104EXUMA2 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included in the package 20-SOIC (0.295, 7.50mm Width) Exposed Pad.The lighting driver has the mounting type Surface Mount.A General Purpose switch type is owned by it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.By default, it is set to output 4.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It comes under the family of TLE8104.A total of 20 terminations have been recorded.For operation, 20 pins are used.As far as the lighting driver is concerned, there are 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1A.It is possible to obtain high efficiency with a supply voltage of 5V.It is positioned in the direction of Surface Mount.This LED driver is equipped with a total of 20 pins.These electrical components are part of the Automotive, AEC Qualified series.This case results in a 3A output current.
TLE8104EXUMA2 Features
Supplied from 5V
TLE8104EXUMA2 Applications
There are a lot of Infineon Technologies TLE8104EXUMA2 Power Switches ICs applications.
- USB3.1 Power Delivery
- Handheld Devices
- Portable Devices
- HDD and SSD
- Smart Phones, Feature Phones
- Portable GPS Device
- HDD, SSD
- USB Power Distribution
- Telecom and Network Systems
- Hot Swaps
