TLE8110EEXUMA2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Automotive |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 600mOhm |
| Terminal Finish | Tin (Sn) |
| Additional Feature | ALSO OPERATES VDD: FROM 4.5 TO 5.5V |
| HTS Code | 8542.39.00.01 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Number of Outputs | 10 |
| Output Type | N-Channel |
| Operating Supply Voltage | 5.5V |
| Interface | SPI, Parallel |
| Nominal Supply Current | 8mA |
| Output Configuration | Low Side |
| Output Current | 3.8A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Turn On Delay Time | 10 μs |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Drain to Source Voltage (Vdss) | 60V |
| Turn-Off Delay Time | 10 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3V~5.5V |
| Max Dual Supply Voltage | 60V |
| Min Dual Supply Voltage | 45V |
| Fault Protection | Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 1.7A |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.55mm |
| Length | 12.8mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
TLE8110EEXUMA2 Overview
Tape & Reel (TR) is how it's packaged.It's included in the 36-BSSOP (0.295, 7.50mm Width) package.The lighting driver has the mounting type Surface Mount.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver has 10 outputs.Operation is based on 4.5V~5.5V supply voltage.There is a maximum output voltage of N-Channel volts on this LED driver.It contains 36 terminations.During operation, the 36 pins are used.As far as functions are concerned, the lighting driver has 1.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.Surface Mount is mounted in the way of this LED driving board.Currently, the LED driving board has 600mOhm resistance.This electrical component can be found in the Automotive series.In this case, the output current will be set to 3.8A.For maximum efficiency, the supply voltage should be set to 5.5V.In addition, ALSO OPERATES VDD: FROM 4.5 TO 5.5V can be produced using this LED driving board.
TLE8110EEXUMA2 Features
Supplied from 3.3V
Resistance of 600mOhm
Additional features like ALSO OPERATES VDD: FROM 4.5 TO 5.5V
TLE8110EEXUMA2 Applications
There are a lot of Infineon Technologies TLE8110EEXUMA2 Power Switches ICs applications.
- Wireless Headsets
- PDAs
- Notebook PC
- Portable GPS Device
- PC Card Hot Swap
- Set-Top Boxes
- Low Voltage I/O System Power
- Hot Swap
- Hot Swap
- Portable Devices
