TLE824523SAAUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Number of Channels | 2 |
| Interface | SPI |
| Output Configuration | High Side or Low Side |
| Output Current | 1.6A |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.25V |
| Quiescent Current | 8mA |
| Switch Type | Relay, Solenoid Driver |
| Halogen Free | Halogen Free |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 8V~17V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Screening Level | AEC-Q100 |
| Rds On (Typ) | 250m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Supply Voltage1-Min | 8V |
| Supply Voltage1-Max | 17V |
| Height Seated (Max) | 3.5mm |
| Length | 15.9mm |
| Width | 11mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TLE824523SAAUMA1 Overview
A Tape & Reel (TR) is used to package it.The 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package contains it.A Surface Mount mounting is used for the LED driving board.This switch is of type Relay, Solenoid Driver.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The lighting driver is equipped with 4 outputs that can be used.The LED driving board operates at 4.75V~5.25V volts.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Slew Rate Controlled, Status Flag features.The termination count is 36.During operation, the 36 pins are used.It has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1.5A.With a supply voltage of 5V, high efficiency is possible.This case results in a 1.6A output current.You can select from 2 channels.
TLE824523SAAUMA1 Features
Supplied from 5V
2 channels
TLE824523SAAUMA1 Applications
There are a lot of Infineon Technologies TLE824523SAAUMA1 Power Switches ICs applications.
- Portable GPS Device
- Set-top-box
- Notebook PC
- PDAs
- Low Voltage I/O System Power
- Hot Swap
- Storage (HDDs, SSDs)
- HDD, SSD
- Portable Music Players
- Handheld Devices
