TLV1805DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLV1805 |
| JESD-30 Code | R-PDSO-G6 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Response Time | 500 ns |
| Voltage - Supply, Single/Dual (±) | 3.3V~40V |
| Average Bias Current-Max (IIB) | 0.0005μA |
| Supply Voltage Limit-Max | 42V |
| Current - Quiescent (Max) | 200μA |
| Voltage - Input Offset (Max) | 4.5mV @ 40V |
| Current - Input Bias (Max) | 0.05pA Typ |
| Hysteresis | 14mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 95dB PSRR |
| Propagation Delay (Max) | 500ns (Typ) |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
TLV1805DBVR Description
The TLV1805DBVR high voltage comparator offers the unique combination of wide supply range, push-pull output, rail-to-rail inputs, low quiescent current,shutdown capability and fast output response. All these features make this comparator well-suited for applications that require sensing at the positive or negative voltage rails such as reverse current protection for a smart diode controller, over current sensing, and over voltage protection circuits where the push-pull output stage is used to drive the gate of a p-channel or n-channel MOSFET switch.
TLV1805DBVR Features
250ns propagation delay
Low input offset voltage: 500 μV
3.3 V to 40 V supply range
Low quiescent current: 135 μA
Shutdown with high-z output
Power-On Reset (POR)
SOT-23-6 package
High peak current push-pull output
Rail-to-rail inputs with phase reversal protection
Built-In hysteresis: 14mV
TLV1805DBVR Applications
MOSFET gate driver
High voltage oscillators
OR-ing MOSFET controller
Reverse current protection smart diode controller
Over voltage, under voltage, and over current detection
The TLV1805DBVR high voltage comparator offers the unique combination of wide supply range, push-pull output, rail-to-rail inputs, low quiescent current,shutdown capability and fast output response. All these features make this comparator well-suited for applications that require sensing at the positive or negative voltage rails such as reverse current protection for a smart diode controller, over current sensing, and over voltage protection circuits where the push-pull output stage is used to drive the gate of a p-channel or n-channel MOSFET switch.
TLV1805DBVR Features
250ns propagation delay
Low input offset voltage: 500 μV
3.3 V to 40 V supply range
Low quiescent current: 135 μA
Shutdown with high-z output
Power-On Reset (POR)
SOT-23-6 package
High peak current push-pull output
Rail-to-rail inputs with phase reversal protection
Built-In hysteresis: 14mV
TLV1805DBVR Applications
MOSFET gate driver
High voltage oscillators
OR-ing MOSFET controller
Reverse current protection smart diode controller
Over voltage, under voltage, and over current detection
