TLV2211CDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TLV2211 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 13μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 150mW |
| Output Current | 50mA |
| Slew Rate | 0.025V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V ±1.35V~5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 56 kHz |
| Gain Bandwidth Product | 65kHz |
| Unity Gain BW-Nom | 65 kHz |
| Voltage Gain | 118.06dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 450μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Max I/O Voltage | 3mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2211CDBVR Overview
A SC-74A, SOT-753 case is used to package the op amp. An op amp ic of the General Purpose type. Linear amplifier is delivered in a Cut Tape (CT) case. The number of terminations is approaching the 5 mark. A total of 5 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 3V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. It has 5 pins that make up the linear amplifier. The input offset voltage is 3mV. This electronic part is best mounted with type Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. You can run this op amp ic on 13μA . The voltage gain should stay at 118.06dB. On the buffer amps, there are 1 channels that can be used. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 5V. As a result of this, the buffer amplifier is packed in TR. Buffer op amp series numbers are indicated by the LinCMOS?.
TLV2211CDBVR Features
5 Pins
supply voltage of 3V
118.06dB voltage gain
Output Type: Rail-to-Rail
TLV2211CDBVR Applications
There are a lot of Texas Instruments TLV2211CDBVR Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- Oscilloscopes
- Automotive sensors
- Laptop
- Multiplication circuits
- High-frequency data acquisition systems
- High input resistance broadband
- Test equipment
- Fission chambers
- Signal amplification
