TLV2221CDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TLV2221 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 110μA |
| Nominal Supply Current | 150μA |
| Power Dissipation | 150mW |
| Output Current | 50mA |
| Slew Rate | 0.18V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V ±1.35V~5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 480 kHz |
| Gain Bandwidth Product | 510kHz |
| Unity Gain BW-Nom | 510 kHz |
| Voltage Gain | 118.06dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 610μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Max I/O Voltage | 3mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2221CDBVR Overview
Packaging for the buffer amplifier is in the form of a SC-74A, SOT-753 case. An op amp ic of the General Purpose type. It comes in a Cut Tape (CT) case, which protects instrumentation amplifier from damage during delivery. There is a growing number of terminations approaching the number of 5. It consists of a total of 5 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. A total of 5 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 3mV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at 0°C~70°C. It is possible to operate this buffer amplifier from a supply current of 110μA . 118.06dB should be the voltage gain. Instrumentation amplifier has 1 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of instrumentation amplifier is rated 5V voltage. A TR-shaped amplifier is used to pack the buffer amps. Instrumentation amplifiers are numbered by their LinCMOS? series.
TLV2221CDBVR Features
5 Pins
supply voltage of 3V
118.06dB voltage gain
Output Type: Rail-to-Rail
TLV2221CDBVR Applications
There are a lot of Texas Instruments TLV2221CDBVR Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Thermocouples
- Power generator
- Commercial audio systems
- Comparator
- Car stereo
- Logarithmic operation circuits
- Broadcasting
- pH (acidity)
- Portable media players
