TLV2221IDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 150mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TLV2221 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Operating Supply Current | 110μA |
| Nominal Supply Current | 150μA |
| Power Dissipation | 150mW |
| Output Current | 50mA |
| Slew Rate | 0.18V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V ±1.35V~5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 480 kHz |
| Gain Bandwidth Product | 510kHz |
| Unity Gain BW-Nom | 510 kHz |
| Voltage Gain | 118.06dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 610μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Max I/O Voltage | 3mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2221IDBVR Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. Buffer amps of this type are called General Purpose-types. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be at least 5 terminations this year. A total of 5 pins are attached to buffer op amp. Please take in mind that op amp should be run at 3V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 5 pins are available on the instrumentation amplifier. The input offset voltage is 3mV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using an 110μA supply current, this operational amplifier ics can be operated. Maintain 118.06dB as the voltage gain. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. There are a total of 1 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. An buffer amplifier is packed in a TR-shape according to the design. LinCMOS? corresponds to linear amplifier's series.
TLV2221IDBVR Features
5 Pins
supply voltage of 3V
118.06dB voltage gain
Output Type: Rail-to-Rail
TLV2221IDBVR Applications
There are a lot of Texas Instruments TLV2221IDBVR Instrumentational OP Amps applications.
- Weighing systems
- Inverse/same-phase proportional circuit
- PDA
- Multiplication circuits
- Video amplifiers
- Medical instruments
- Large motor controllers
- High gain DC amplifier
- E-book readers
- Video conversion and routing
