TLV2231IDBVT
| Parameters | |
|---|---|
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TLV2231 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Operating Supply Current | 850μA |
| Nominal Supply Current | 1.3mA |
| Power Dissipation | 150mW |
| Output Current | 50mA |
| Slew Rate | 1.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V ±1.35V~5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 1.9MHz |
| Gain Bandwidth Product | 2MHz |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 112.04dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 710μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Max I/O Voltage | 3mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
TLV2231IDBVT Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case. This is a General Purpose type op amp. A Tape & Reel (TR) case is used for delivering the op amp. We are approaching the 5h termination of the year. In this case, there are 5 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 5 pins. As far as the input offset voltage is concerned, linear amplifier rates at 3mV. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . A supply current of 850μA can be used to operate this linear amplifier. The voltage gain should stay at 112.04dB. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The total number of elements in this buffer amplifier is 1. The operating supply voltage of instrumentation amplifier is rated 5V voltage. As a result of this, the buffer amplifier is packed in TR. LinCMOS? is the number that corresponds to the series of the buffer op amp.
TLV2231IDBVT Features
5 Pins
supply voltage of 3V
112.04dB voltage gain
Output Type: Rail-to-Rail
TLV2231IDBVT Applications
There are a lot of Texas Instruments TLV2231IDBVT Instrumentational OP Amps applications.
- Subtraction operation circuits
- Video conversion and routing
- Radiation thermometry transducers
- Power transmission
- Gaming industry
- Car stereo
- Medical instruments
- Communication device
- Precision measurement
- Signal filtering
