TLV2242ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV2242 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Number of Channels | 2 |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 2.5μA |
| Power Dissipation | 710mW |
| Output Current | 200μA |
| Slew Rate | 0.002V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 55 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12V ±1.25V~6V |
| Output Current per Channel | 200μA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 5.5 kHz |
| Unity Gain BW-Nom | 5.5 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 600μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0005μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 5.5 kHz |
| Max I/O Voltage | 3mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2242ID Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. General Purpose-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. Please take in mind that op amp should be run at 2.7V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 8 pins. There is an input offset voltage of 3mV for this buffer op amp. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. You can run this op amp ic on 1μA . Voltage gain should remain at 120dB. There are 2 channels on the operational amplifiers. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of instrumentation amplifier is rated 6V voltage.
TLV2242ID Features
8 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2242ID Applications
There are a lot of Texas Instruments TLV2242ID Instrumentational OP Amps applications.
- Vehicle electronics
- Displayers for aircraft and air transportation control systems
- single/dual op amp sum and difference circuits
- Band-pass filter
- Precision measurement
- High-frequency data acquisition systems
- Exponential operation circuits
- Digital cameras
- PDA
- Tablets
