TLV2244IDR
| Parameters | |
|---|---|
| Unity Gain BW-Nom | 5.5 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16.5V |
| Voltage - Input Offset | 600μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Max I/O Voltage | 3mV |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLV2244 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Number of Elements | 4 |
| Power Supplies | +-1.25/+-6/2.5/12V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 5μA |
| Power Dissipation | 1.022W |
| Output Current | 200μA |
| Slew Rate | 0.002V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 55 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12V ±1.25V~6V |
| Output Current per Channel | 200μA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 5.5 kHz |
TLV2244IDR Overview
Op amp is packaged in 14-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 14. Linear amplifier has a total of 14 pins. This linear amplifier should be powered by an 2.7V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 14 pins on this chip. Regarding input offset voltage, buffer amplifier rates 3mV voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . A supply current of 1μA can be used to operate this linear amplifier. It is a member of the 120dB's 120dB family. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. There are 4 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 6V. TR is adopted to pack the instrumentation amplifier.
TLV2244IDR Features
14 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2244IDR Applications
There are a lot of Texas Instruments TLV2244IDR Instrumentational OP Amps applications.
- Laptop
- Logarithmic operation circuits
- Blood pressure sensors
- Multimedia playback equipment
- PDA
- Mobile phone
- Fast A/D and D/A converters
- Fission chambers
- Broadcasting
- Vehicle electronics
