TLV2244IPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV2244 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Number of Elements | 4 |
| Power Supplies | +-1.25/+-6/2.5/12V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 5μA |
| Power Dissipation | 720mW |
| Output Current | 200μA |
| Slew Rate | 0.002V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 55 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12V ±1.25V~6V |
| Output Current per Channel | 200μA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 5.5 kHz |
| Unity Gain BW-Nom | 5.5 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16.5V |
| Voltage - Input Offset | 600μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Max I/O Voltage | 3mV |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2244IPW Overview
In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. This is a General Purpose type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations is approaching the 14 mark. A total of 14 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 2.7V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. A total of 14 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 3mV voltage. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Using a supply current of 1μA , this buffer op amp will be able to operate. 120dB should be the voltage gain. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. A total of 4 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 6V.
TLV2244IPW Features
14 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2244IPW Applications
There are a lot of Texas Instruments TLV2244IPW Instrumentational OP Amps applications.
- Differentiator circuits
- pH (acidity)
- Precision measurement
- Large motor controllers
- Test equipment
- Hand-held batteries
- High-frequency data acquisition systems
- Video conversion and routing
- Radiation thermometry transducers
- Image computer boards
