TLV2252AIDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | TLV2252 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 4V |
| Number of Elements | 2 |
| Operating Supply Current | 70μA |
| Nominal Supply Current | 125μA |
| Power Dissipation | 725mW |
| Output Current | 50mA |
| Slew Rate | 0.12V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~8V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 850μV |
| Bandwidth | 187 kHz |
| Gain Bandwidth Product | 200kHz |
| Unity Gain BW-Nom | 200 kHz |
| Voltage Gain | 124.61dB |
| Average Bias Current-Max (IIB) | 0.001μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Voltage - Input Offset | 200μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Max I/O Voltage | 850μV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2252AIDRG4 Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. An op amp of this type is a General Purpose-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There have been a total of 8 terminations over the past year. In total, there are 8 pins on this op amp ic. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 850μV voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 70μA . There should be no change in the voltage gain at 124.61dB. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. The operating supply voltage of instrumentation amplifier is rated 4V voltage. The instrumentation amplifier is packed in the form of TR. The LinCMOS? represents the op amp's series number.
TLV2252AIDRG4 Features
8 Pins
supply voltage of 3V
124.61dB voltage gain
Output Type: Rail-to-Rail
TLV2252AIDRG4 Applications
There are a lot of Texas Instruments TLV2252AIDRG4 Instrumentational OP Amps applications.
- High speed sample
- Portable media players
- PDA
- Fast A/D and D/A converters
- Computer workstations
- Communication
- Broadcasting
- Signal filtering
- Differentiator circuits
- Automation control systems
