TLV2252AQDREP
| Parameters | |
|---|---|
| Nominal Gain Bandwidth Product | 187 kHz |
| Max I/O Voltage | 850μV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | TLV2252 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Power Supplies | 3/5V |
| Number of Circuits | 2 |
| Operating Supply Current | 70μA |
| Nominal Supply Current | 125μA |
| Output Current | 50mA |
| Slew Rate | 0.12V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~8V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 187 kHz |
| Gain Bandwidth Product | 200kHz |
| Unity Gain BW-Nom | 200 kHz |
| Voltage Gain | 124.61dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
TLV2252AQDREP Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. Buffer amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are located on the operational amplifiers. There is an input offset voltage of 200μV for this buffer op amp. Surface Mount is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. You can run this op amp ic on 70μA . 124.61dB should be the voltage gain. During the manufacturing process, this buffer amplifier is divided into 2 circuits. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 8V. As a result of this, the buffer amplifier is packed in TR. LinCMOS? is the number that corresponds to the series of the buffer op amp.
TLV2252AQDREP Features
8 Pins
supply voltage of 3V
124.61dB voltage gain
Output Type: Rail-to-Rail
TLV2252AQDREP Applications
There are a lot of Texas Instruments TLV2252AQDREP Instrumentational OP Amps applications.
- pH (acidity)
- E-book readers
- Video data acquisition
- Broadcasting
- Portable media players
- Communication device
- Weak signal detection
- Precision measurement
- Cinema or auditorium audio system
- Measurements of Wheatstone bridge
