TLV2252IP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | TLV2252 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 4V |
| Number of Elements | 2 |
| Operating Supply Current | 70μA |
| Nominal Supply Current | 125μA |
| Power Dissipation | 1W |
| Output Current | 50mA |
| Slew Rate | 0.12V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~8V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 187 kHz |
| Gain Bandwidth Product | 200kHz |
| Unity Gain BW-Nom | 200 kHz |
| Voltage Gain | 124.61dB |
| Average Bias Current-Max (IIB) | 0.001μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Voltage - Input Offset | 200μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Max I/O Voltage | 1.5mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2252IP Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. The instrumentation amplifier in this picture is of the General Purpose-type. There is a Tube case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. This linear amplifier should be powered by an 3V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. In total, the buffer amplifier consists of 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 1.5mV. Through Hole is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~125°C. A supply current of 70μA can be used to operate this linear amplifier. 124.61dB should remain the voltage gain. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There are 2 elements in total in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 4V voltage. LinCMOS? corresponds to linear amplifier's series.
TLV2252IP Features
8 Pins
supply voltage of 3V
124.61dB voltage gain
Output Type: Rail-to-Rail
TLV2252IP Applications
There are a lot of Texas Instruments TLV2252IP Instrumentational OP Amps applications.
- Video amplifiers
- Oscilloscopes
- Weak signal detection
- Fission chambers
- Logarithmic operation circuits
- Band-pass filter
- High-frequency data acquisition systems
- Division circuits
- Information processing
- Precision measurement
