TLV2254AIN

4 Channels 50mA per Channel 1pA 65 dB Instrumentational OP Amps 0.001μA 4V 2.7V~8V ±1.35V~4V TLV2254 14 Pins 14-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2254AIN
Package: 14-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 323
Description: 4 Channels 50mA per Channel 1pA 65 dB Instrumentational OP Amps 0.001μA 4V 2.7V~8V ±1.35V~4V TLV2254 14 Pins 14-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	14
Operating Temperature	-40°C~125°C
Packaging	Tube
Series	LinCMOS™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Terminal Position	DUAL
Number of Functions	4
Supply Voltage	3V
Base Part Number	TLV2254
Pin Count	14
Output Type	Rail-to-Rail
Operating Supply Voltage	4V
Number of Channels	4
Operating Supply Current	140μA
Nominal Supply Current	250μA
Power Dissipation	1.15W
Output Current	50mA
Slew Rate	0.12V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.7V~8V ±1.35V~4V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	850μV
Bandwidth	187 kHz
Gain Bandwidth Product	200kHz
Unity Gain BW-Nom	200 kHz
Voltage Gain	124.61dB
Average Bias Current-Max (IIB)	0.001μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	16V
Voltage - Input Offset	200μV
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Dual Supply Voltage	3V
Max I/O Voltage	850μV
Input Offset Current-Max (IIO)	0.00006μA
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2254AIN Overview

It is packaged in an 14-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp ic of the General Purpose type. A Tube case is used to deliver the buffer op amp. The number of terminations approaches 14. Buffer amplifier has a total of 14 pins. I would like to remind you that this buffer op amp should be powered by an 3V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 14 pins are available on the instrumentation amplifier. Op amp ic rates 850μV for input offset voltage. For this electronic part, it is recommended that you mount it with type Through Hole. With regard to operating temperature, op amp ranges -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 140μA and 10 . You should keep the voltage gain at 124.61dB for the time being. As far as the device is concerned, buffer amplifier has 4 channels. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 4V. In this case, LinCMOS? represents the instrumentation amplifiers' series number.