TLV2254AQD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLV2254 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 4V |
| Power Supplies | +-1.35/+-8/2.7/16V |
| Number of Circuits | 4 |
| Operating Supply Current | 140μA |
| Nominal Supply Current | 250μA |
| Output Current | 50mA |
| Slew Rate | 0.12V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~8V ±1.35V~4V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 187 kHz |
| Gain Bandwidth Product | 200kHz |
| Unity Gain BW-Nom | 200 kHz |
| Voltage Gain | 124.61dB |
| Average Bias Current-Max (IIB) | 0.001μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Max I/O Voltage | 850μV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2254AQD Overview
There is a 14-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. A General Purpose-type buffer amplifier is shown here. The op amp is delivered to you in a Tube case. In recent months, the number of terminations has approached 14. A total of 14 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 3V volts. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 14 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 200μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, this op amp functions well at -40°C~125°C. You can run this op amp ic on 140μA . There should be no change in the voltage gain. This op amp contains 4 circuits. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 4V. The instrumentation amplifier is packed in the form of TR. LinCMOS? is the number that corresponds to the series of the buffer op amp.
TLV2254AQD Features
14 Pins
supply voltage of 3V
124.61dB voltage gain
Output Type: Rail-to-Rail
TLV2254AQD Applications
There are a lot of Texas Instruments TLV2254AQD Instrumentational OP Amps applications.
- Comparator
- Multimedia playback equipment
- Power generator
- PDA
- Computer workstations
- Strain gauges
- Television
- Biopotential
- Ultrasound transducers
- Scintillation detectors
