Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3V |
Base Part Number |
TLV2262 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
4V |
Number of Channels |
2 |
Operating Supply Current |
400μA |
Nominal Supply Current |
500μA |
Power Dissipation |
725mW |
Output Current |
50mA |
Slew Rate |
0.55V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
65 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
2.7V~8V ±1.35V~4V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
950μV |
Bandwidth |
670 kHz |
Gain Bandwidth Product |
710kHz |
Unity Gain BW-Nom |
710 kHz |
Voltage Gain |
114.81dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
16V |
Voltage - Input Offset |
300μV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Dual Supply Voltage |
3V |
Max I/O Voltage |
950μV |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV2262AID Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. This is a General Purpose type op amp. Upon delivery, op amp ic is packaged in a Tube case. In recent months, the number of terminations has approached 8. The pins on this board total to 8 in total. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 8-pin op amp ic is included in the package. The input offset voltage is 950μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. This op amp can operate from a supply current at 400μA. Keeping the voltage gain at 114.81dB is the best course of action. There are 2 channels on the operational amplifiers. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of instrumentation amplifier is rated 4V voltage. This buffer amplifier is assigned within the LinCMOS? series by its manufacturer.
TLV2262AID Features
8 Pins
supply voltage of 3V
114.81dB voltage gain
Output Type: Rail-to-Rail
TLV2262AID Applications
There are a lot of Texas Instruments TLV2262AID Instrumentational OP Amps applications.
- Medical imaging
- single/dual op amp sum and difference circuits
- Portable docking station
- Weak signal detection
- Differentiator circuits
- Measurements of Wheatstone bridge
- Thermocouples
- Fast A/D and D/A converters
- Blood pressure sensors
- Mobile phone