Parameters |
Supply Voltage Limit-Max |
16V |
Voltage - Input Offset |
300μV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Dual Supply Voltage |
3V |
Max I/O Voltage |
950μV |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
1.2mm |
Length |
3mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Base Part Number |
TLV2262 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
4V |
Number of Elements |
2 |
Operating Supply Current |
400μA |
Nominal Supply Current |
500μA |
Power Dissipation |
525mW |
Output Current |
50mA |
Slew Rate |
0.55V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
65 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
2.7V~8V ±1.35V~4V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
950μV |
Bandwidth |
670 kHz |
Gain Bandwidth Product |
710kHz |
Unity Gain BW-Nom |
710 kHz |
Voltage Gain |
114.81dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
TLV2262AIPW Overview
Op amp is packaged in 8-TSSOP (0.173, 4.40mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. A total of 8 pins are present on the instrumentation amplifier. The input offset voltage is 950μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Operational amplifier can operate supply current at 400μA. It is recommended to keep the voltage gain at 114.81dB at all times. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. There is a rating of 2 for the operating supply voltage of the buffer op amp. The operating supply voltage of the buffer op amp is rated at 4V. As the name implies, LinCMOS? refers to the series of the buffer op amp.
TLV2262AIPW Features
8 Pins
supply voltage of 3V
114.81dB voltage gain
Output Type: Rail-to-Rail
TLV2262AIPW Applications
There are a lot of Texas Instruments TLV2262AIPW Instrumentational OP Amps applications.
- Integrator circuits
- Non-polarized electrodes
- Cinema or auditorium audio system
- Polarized electrodes
- Voltage regulation circuit
- Precision measurement
- Weak signal detection
- Signal amplification
- Broadcasting
- Industrial applications including automation