TLV2264AIN
| Parameters | |
|---|---|
| Dual Supply Voltage | 3V |
| Max I/O Voltage | 950μV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Base Part Number | TLV2264 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 4V |
| Number of Elements | 4 |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 1.15W |
| Output Current | 50mA |
| Slew Rate | 0.55V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~8V ±1.35V~4V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 950μV |
| Bandwidth | 670 kHz |
| Gain Bandwidth Product | 710kHz |
| Unity Gain BW-Nom | 710 kHz |
| Voltage Gain | 114.81dB |
| Average Bias Current-Max (IIB) | 0.0008μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Voltage - Input Offset | 300μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
TLV2264AIN Overview
It is packaged in an 14-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. The case in which buffer amplifier is delivered is called a Tube case. In recent months, the number of terminations has approached 14. There are a total of 14 pins on this op amp. This linear amplifier should be powered by an 3V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. An 14-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 950μV voltage. This electrical part should be mounted using type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Using an 800μA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. A total of 4 elements are present in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 4V voltage. The LinCMOS? indicates the series number of the op amp.
TLV2264AIN Features
14 Pins
supply voltage of 3V
114.81dB voltage gain
Output Type: Rail-to-Rail
TLV2264AIN Applications
There are a lot of Texas Instruments TLV2264AIN Instrumentational OP Amps applications.
- High input resistance broadband
- Test equipment
- Logarithmic operation circuits
- pH (acidity)
- Automotive sensors
- Professional videography
- Radiation thermometry transducers
- Communication
- Multiplication circuits
- Mobile phone
