TLV2264IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 950mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLV2264 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 4V |
| Number of Elements | 4 |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 950mW |
| Output Current | 50mA |
| Slew Rate | 0.55V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~8V ±1.35V~4V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 670 kHz |
| Gain Bandwidth Product | 710kHz |
| Unity Gain BW-Nom | 710 kHz |
| Voltage Gain | 114.81dB |
| Average Bias Current-Max (IIB) | 0.0008μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Voltage - Input Offset | 300μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Max I/O Voltage | 2.5mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2264IDR Overview
Packaging for the buffer amplifier is in the form of a 14-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. There is a Cut Tape (CT) case that is delivered with the instrumentation amplifiers. A total of 14 terminations have been reported in the past few weeks. Buffer amplifier has a total of 14 pins on it. This linear amplifier should be powered by an 3V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 14 pins. Regarding input offset voltage, buffer amplifier rates 2.5mV voltage. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. You can run this op amp ic on 800μA . Keeping the voltage gain at 114.81dB is the best course of action. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. There are 4 elements in this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 4V voltage. The instrumentation amplifier is packed in the form of TR. This buffer amplifier is assigned within the LinCMOS? series by its manufacturer.
TLV2264IDR Features
14 Pins
supply voltage of 3V
114.81dB voltage gain
Output Type: Rail-to-Rail
TLV2264IDR Applications
There are a lot of Texas Instruments TLV2264IDR Instrumentational OP Amps applications.
- Proportional operation circuits
- Signal operation
- Displayers for aircraft and air transportation control systems
- Fast A/D and D/A converters
- Subtraction operation circuits
- Gaming industry
- Automatic control
- Fission chambers
- RF cable systems
- Professional videography
