TLV2264IN
| Parameters | |
|---|---|
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Base Part Number | TLV2264 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 4V |
| Number of Elements | 4 |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 1.15W |
| Output Current | 50mA |
| Slew Rate | 0.55V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~8V ±1.35V~4V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 670 kHz |
| Gain Bandwidth Product | 710kHz |
| Unity Gain BW-Nom | 710 kHz |
| Voltage Gain | 114.81dB |
| Average Bias Current-Max (IIB) | 0.0008μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Voltage - Input Offset | 300μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Max I/O Voltage | 2.5mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
TLV2264IN Overview
There is a 14-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. Linear amplifier is delivered in a Tube case. The number of terminations approaches 14. There are a total of 14 pins on this op amp. The linear amplifier should be run at 3V at all times, so please keep that in mind when using it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 14 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 2.5mV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . A supply current of 800μA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 114.81dB at all times. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. 4 elements make up the design of this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 4V voltage. The LinCMOS? stands for the buffer op amp's serial number.
TLV2264IN Features
14 Pins
supply voltage of 3V
114.81dB voltage gain
Output Type: Rail-to-Rail
TLV2264IN Applications
There are a lot of Texas Instruments TLV2264IN Instrumentational OP Amps applications.
- Digital cameras
- Thermocouples
- pH (acidity)
- Signal filtering
- Displayers for aircraft and air transportation control systems
- Portable docking station
- Measurements of Wheatstone bridge
- Commercial audio systems
- Video data acquisition
- Video computer boards
