TLV2302IDGK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Amplifier, Comparator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Filter |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 481mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV2302 |
| Pin Count | 8 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.5V |
| Nominal Supply Current | 1.7μA |
| Power Dissipation | 481mW |
| Max Supply Current | 1.7μA |
| Response Time | 55 μs |
| Slew Rate | 2500 V/us |
| Architecture | VOLTAGE-FEEDBACK |
| Common Mode Rejection Ratio | 88 dB |
| Input Offset Voltage (Vos) | 5mV |
| Unity Gain BW-Nom | 5.5 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 8V |
| Low-Bias | YES |
| Micropower | YES |
| Min Dual Supply Voltage | 1.25V |
| Bias Current-Max (IIB) @25C | 0.0005μA |
| Programmable Power | NO |
| Input Bias Current | 500pA |
| Wideband | NO |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2302IDGK Overview
For the purpose of storing this item, a package number of Tube is used.The Amplifier, Comparator is an excellent value for the money.Dispatched with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.It is important to note that the mounting of the part occurs in the Surface Mount direction.Filter is its primary use.Device TLV2302 is its base part number.Amplification purposes are served here by the 2 functions.8 terminals are available in total, each of which is capable of performing a different task.There is a need to control the iron temperature under 260 when returning a part to the peak relow stage.The part has 8 pins in total.The amplifier runs best at a supply voltage of 2.7V, as a minimum supply voltage of 2.7V is recommended.It is a 8-pin amplifier that can be customized to meet your specific needs.It can operate at temperatures as low as -40°C.I am impressed that this part can operate under temperatures as high as 125°C.To enhance design flexibility, Surface Mount is adpated to this product.Similarly, it has excellent amplifying capabilities, as will other high-quality Operational Amplifiers.Max supply voltage is 16V.The power supplied must be at least 2.5V.With this video processing device, you can achieve amazing performance by combining 2 channels together.With its excellent voltage gain, this amplifier is one of the best on the market.
TLV2302IDGK Features
TLV2302IDGK Applications
There are a lot of Texas Instruments TLV2302IDGK Special Purpose Amplifiers applications.
- Cinema or auditorium audio system
- Proportional counter tubes
- Broadcasting
- ECG equipment
- Signal operation
- Laptop
- Band-pass filter
- Multiplication and division circuits
- Portable docking station
- Voltage regulation circuit
