TLV2302IDGKRG4
| Parameters | |
|---|---|
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.5V |
| Power Dissipation-Max | 481mW |
| Nominal Supply Current | 1.7μA |
| Power Dissipation | 481mW |
| Max Supply Current | 1.7μA |
| Response Time | 55 μs |
| Slew Rate | 2500 V/us |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 500pA |
| Input Offset Voltage (Vos) | 5mV |
| Unity Gain BW-Nom | 5.5 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.001μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 8V |
| Low-Bias | YES |
| Micropower | YES |
| Min Dual Supply Voltage | 1.25V |
| Bias Current-Max (IIB) @25C | 0.0005μA |
| Programmable Power | NO |
| Wideband | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | VSSOP |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
TLV2302IDGKRG4 Overview
The product is packaged in VSSOP to facilitate transportation.Electronic comparator is shipped by Tape and Reel .The comparator has 8 terminals.Other Operational Amplifier like the device play a important role in the industry.When supplied with 2.7V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator has 8 pins.The comparator has 8 pins.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current for the device be set to 1.7μA .A current supply greater than 1.7μA may result in the comparator malfunctioning.From the voltage formula, the voltage gain of the part is 120dB .Comparator electronics is not recommended to operate at a temperature higher than 125°C .Temperature lower than -40°C is not suitable for the it.Comparator electronics is specified that the comparator's maximum supply voltage is 16V .Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 2.5V .For the output to be of high quality, 2 channels must cooperate together.There is essentially a very high gain OPERATIONAL AMPLIFIER amplifier in the comparator.
TLV2302IDGKRG4 Features
Voltage Gain: 120dB
OPERATIONAL AMPLIFIER amplifier
TLV2302IDGKRG4 Applications
There are a lot of Texas Instruments TLV2302IDGKRG4 linear comparators applications.
- RC Timers
- General-Purpose Portable Devices
- Hand-Held Electronics
- Factory automation & control
- Security Detection Systems
- Power management
- Lithium ion battery monitoring
- Pulse, Squarewave, and Time Delay Generators
- Window Comparators
- Zero-Crossing Detectors
