TLV2302IDRG4
| Parameters | |
|---|---|
| Current - Input Bias | 500pA |
| Input Offset Voltage (Vos) | 5mV |
| Unity Gain BW-Nom | 5.5 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.001μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 8V |
| Low-Bias | YES |
| Micropower | YES |
| Min Dual Supply Voltage | 1.25V |
| Bias Current-Max (IIB) @25C | 0.0005μA |
| Programmable Power | NO |
| Wideband | NO |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.905mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Pin Count | 8 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.5V |
| Power Dissipation-Max | 710mW |
| Nominal Supply Current | 1.7μA |
| Power Dissipation | 710mW |
| Max Supply Current | 1.7μA |
| Response Time | 55 μs |
| Slew Rate | 2500 V/us |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 88 dB |
TLV2302IDRG4 Overview
The product is packaged in SOIC for ease of transportation.Electronic comparator is shipped by Tape and Reel .As you can see, the comparator has8 terminals.The electrical component in this case belongs to the Operational Amplifier families.Electronic comparator is capable of performing numerous tasks when powered by 2.7V voltage.A total of 8 pins are included.8 pins are available on the comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be 1.7μA in order to use the device normally.A current supply greater than 1.7μA may cause the comparator to malfunction.In accordance with the voltage formula, the part's voltage gain is 120dB .In general, temperatures higher than 125°C are not recommended.A temperature lower than -40°C is unsuitable for the device.The comparator has a maximum supply voltage of 16V .This comparator can be supplied with a voltage as low as 2.5V .In order to maintain the quality of the output, 2 channels cooperate together.The comparator essentially has a OPERATIONAL AMPLIFIER amplifier that has very high gain.
TLV2302IDRG4 Features
Voltage Gain: 120dB
OPERATIONAL AMPLIFIER amplifier
TLV2302IDRG4 Applications
There are a lot of Texas Instruments TLV2302IDRG4 linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- Mobile Phones and Tablets
- Factory automation & control
- Automotive
- Multivibrators and High-Voltage Digital Logic Gates
- Battery-Powered Electronics
- Simple Analog-to-Digital Converters (ADCs)
- Point of load regulators
- Appliances
- Automatic Test Equipment
