Parameters |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
14 |
Weight |
122.413241mg |
Packaging |
Rail/Tube |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Subcategory |
Operational Amplifier |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
2.7V |
Pin Count |
14 |
Number of Elements |
4 |
Temperature Grade |
AUTOMOTIVE |
Number of Channels |
2 |
Max Supply Voltage |
16V |
Min Supply Voltage |
2.5V |
Power Dissipation-Max |
1.022W |
Nominal Supply Current |
1.7μA |
Power Dissipation |
1.022W |
Max Supply Current |
1.7μA |
Current - Output |
200mA |
Response Time |
55 μs |
Slew Rate |
2500 V/us |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
OPERATIONAL AMPLIFIER |
Common Mode Rejection Ratio |
88 dB |
Current - Input Bias |
500pA |
Output Current per Channel |
200μA |
Input Offset Voltage (Vos) |
5mV |
Unity Gain BW-Nom |
5.5 kHz |
Voltage Gain |
120dB |
Average Bias Current-Max (IIB) |
0.001μA |
Power Supply Rejection Ratio (PSRR) |
105dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Max Dual Supply Voltage |
8V |
Low-Bias |
YES |
Micropower |
YES |
Min Dual Supply Voltage |
1.25V |
Bias Current-Max (IIB) @25C |
0.0005μA |
Programmable Power |
NO |
Wideband |
NO |
Height Seated (Max) |
1.75mm |
Length |
8.65mm |
Width |
3.905mm |
TLV2304IDG4 Overview
To facilitate transportation, it comes packaged in SOIC .Electronic comparator is shipped by Rail/Tube .The comparator has a total of 14 terminals.Electronic comparator is a component of the Operational Amplifier family.The comparator is capable of achieving many demanding tasks when supplied with 2.7V voltage.This is a 4 element comparator.There are 14 pins on this board.The comparator consists of 14 pins.The PCB or other board has a Surface Mount for mounting.The nominal supply current of the device should be 1.7μA for normal use.If the current supply exceeds 1.7μA , the comparator could malfunction.The voltage gain of the part is indicated by 120dB in the voltage formula.In general, temperatures higher than 125°C are not recommended.Comparator electronics cannot be operated at a temperature lower than -40°C .There is a maximum voltage supply on the comparator of 16V .Comparator electronics is possible to supply this comparator wComparator electronicsh a voltage as low as 2.5V .The output quality of 2 channels is maintained by cooperating with each other.This comparator basically consists of a OPERATIONAL AMPLIFIER amplifier with very high gain.Comparator electronics has an output current rated at 200mA .
TLV2304IDG4 Features
Employing 4 elements
Voltage Gain: 120dB
OPERATIONAL AMPLIFIER amplifier
TLV2304IDG4 Applications
There are a lot of Texas Instruments TLV2304IDG4 linear comparators applications.
- Infotainment & cluster
- Lithium ion battery monitoring
- Zero-Crossing Detectors
- High-Speed Sampling Circuits
- Factory automation & control
- Wide Range VCO; MOS Clock Timers
- Wearable Devices
- Battery management and protection
- Industrial
- Window Comparators, Multivibrators