TLV2304IPWR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Amplifier, Comparator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Filter |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 720mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV2304 |
| Pin Count | 14 |
| Number of Elements | 4 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.5V |
| Nominal Supply Current | 1.7μA |
| Power Dissipation | 720mW |
| Output Current | 200mA |
| Max Supply Current | 1.7μA |
| Response Time | 55 μs |
| Slew Rate | 2500 V/us |
| Architecture | VOLTAGE-FEEDBACK |
| Common Mode Rejection Ratio | 88 dB |
| Output Current per Channel | 200μA |
| Input Offset Voltage (Vos) | 5mV |
| Unity Gain BW-Nom | 5.5 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.001μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 8V |
| Low-Bias | YES |
| Micropower | YES |
| Min Dual Supply Voltage | 1.25V |
| Bias Current-Max (IIB) @25C | 0.0005μA |
| Programmable Power | NO |
| Input Bias Current | 500pA |
| Wideband | NO |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2304IPWR Overview
This product is packaged in a Cut Tape (CT) package.There is no doubt that this is an excellent Amplifier, Comparator that is very good value for money.Added to the package 14-TSSOP (0.173, 4.40mm Width) as part of the dispatch process.Mounted in Surface Mount is the part.Filter is the main application in which it is found.This device has a base part number of TLV2304.As a result of this, the 4 functions here can be accessed to get high performance for amplification purposes.14 terminals are present in total, each with its own set of functions that can be carried out.In order to achieve the maximum relow for the part, the iron temperature should be controlled under 260 during the peak relow procedure.14 pins are present in total in the part.An ideal supply voltage for the amplifier will be 2.7V in order for it to run as efficiently as possible.You can use this amplifier for your custom applications by using the 14-pin connector.A device can operate at a temperature as low as -40°C, which is the lowest temperature at which it can operate.An impressive feature of this part is its ability to run at temperatures as high as 125°C.This product provides greater design flexibility with Surface Mount.In addition to being able to amplify just like other high-quality Operational Amplifier, it also has a fascinating reverb system.There is a maximum supply voltage of 16V for this product.Powered by at least 2.5V.As a result of combining 2 channels, this video processing device is able to deliver amazing performance.120dB represents the amplifier's voltage gain, which is excellent.In order to achieve efficient amplification, 4 elements are used.
TLV2304IPWR Features
TLV2304IPWR Applications
There are a lot of Texas Instruments TLV2304IPWR Special Purpose Amplifiers applications.
- Navigation
- Logarithmic and exponential operation circuits
- E-book readers
- Communication
- Video data acquisition
- High/low-pass filter circuit
- Gaming industry
- Signal amplification
- Television broadcasting equipment
- ECG equipment
