TLV2304IPWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Pin Count | 14 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 4 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.5V |
| Power Dissipation-Max | 720mW |
| Nominal Supply Current | 1.7μA |
| Power Dissipation | 720mW |
| Max Supply Current | 1.7μA |
| Current - Output | 200mA |
| Response Time | 55 μs |
| Slew Rate | 2500 V/us |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 500pA |
| Output Current per Channel | 200μA |
| Input Offset Voltage (Vos) | 5mV |
| Unity Gain BW-Nom | 5.5 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.001μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 8V |
| Low-Bias | YES |
| Micropower | YES |
| Min Dual Supply Voltage | 1.25V |
| Bias Current-Max (IIB) @25C | 0.0005μA |
| Programmable Power | NO |
| Wideband | NO |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLV2304IPWRG4 Overview
A convenient packaging is provided in the form of TSSOP .We ship the part through Tape and Reel .The device is designed with 14 terminations.The component belongs to the Operational Amplifier family of electrical components.When supplied with 2.7V voltage, the comparator is capable of performing a wide range of tasks.There are 14 pins on this board.Electronic comparator has 14 pins.A Surface Mount is provided for mounting on PCBs or other boards.Normal use of the device should require a nominal supply current of 1.7μA .A supply current exceeding 1.7μA may result in the comparator malfunctioning.A voltage gain of 120dB can be determined from the voltage formula for the part.Comparator electronics is not recommended to operate at a temperature higher than 125°C .Comparator electronics is not suComparator electronicsable for temperatures below -40°C .16V is the maximum supply voltage of the comparator.A voltage of 2.5V is the minimum supply voltage allowed by this comparator.The output quality of 4 channels is maintained by cooperating with each other.A comparator consists of a high-gain OPERATIONAL AMPLIFIER amplifier.This device has a 200mA output current.
TLV2304IPWRG4 Features
Voltage Gain: 120dB
OPERATIONAL AMPLIFIER amplifier
TLV2304IPWRG4 Applications
There are a lot of Texas Instruments TLV2304IPWRG4 linear comparators applications.
- Alarm and Monitoring Circuits
- Window Comparators
- Point of load regulators
- Wide Range VCO; MOS Clock Timers
- Multivibrators and High-Voltage Digital Logic Gates
- Self-diagnostics
- Current and voltage sensing
- Motor drives
- Appliances
- Battery-Powered Electronics
