TLV2332IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLV2332 |
| Pin Count | 8 |
| Operating Supply Voltage | 4V |
| Power Supplies | 3/5V |
| Number of Circuits | 2 |
| Operating Supply Current | 210μA |
| Nominal Supply Current | 560μA |
| Output Current | 30mA |
| Slew Rate | 0.43V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.6pA |
| Voltage - Supply, Single/Dual (±) | 2V~8V ±1V~4V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 1.1mV |
| Bandwidth | 300 kHz |
| Gain Bandwidth Product | 525kHz |
| Unity Gain BW-Nom | 525 kHz |
| Voltage Gain | 104.61dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Max I/O Voltage | 9mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2332IDR Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 8. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 1.1mV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. An 210μA volt supply current is needed for this linear amplifier to operate. Op amp is a member of the 104.61dB's 104.61dB family. This op amp contains 2 circuits. The operating supply voltage of instrumentation amplifier is rated 4V voltage. The linear amplifier is packaged by using a TR axis. LinCMOS? is the number that corresponds to the series of the buffer op amp.
TLV2332IDR Features
8 Pins
supply voltage of 5V
104.61dB voltage gain
TLV2332IDR Applications
There are a lot of Texas Instruments TLV2332IDR Instrumentational OP Amps applications.
- Differentiator circuits
- High speed sample
- Television broadcasting equipment
- High input resistance broadband
- single/dual op amp sum and difference circuits
- pH (acidity)
- Communication device
- Band-pass filter
- Subtraction operation circuits
- Precision measurement
