TLV2332IP
| Parameters | |
|---|---|
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLV2332 |
| Pin Count | 8 |
| Operating Supply Voltage | 4V |
| Power Supplies | 3/5V |
| Number of Circuits | 2 |
| Operating Supply Current | 210μA |
| Nominal Supply Current | 560μA |
| Output Current | 30mA |
| Slew Rate | 0.43V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.6pA |
| Voltage - Supply, Single/Dual (±) | 2V~8V ±1V~4V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 1.1mV |
| Bandwidth | 300 kHz |
| Gain Bandwidth Product | 525kHz |
| Unity Gain BW-Nom | 525 kHz |
| Voltage Gain | 104.61dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Max I/O Voltage | 9mV |
| Power | NO |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
TLV2332IP Overview
There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. In this case, there are 8 pins on the board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 8 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 1.1mV. This electronic component is recommended to be mounted using the mounting type Through Hole. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureOperational amplifier can operate supply current at 210μA. 104.61dB should remain the voltage gain. A instrumentation amplifier like this has 2 circuits. The operating supply voltage of the buffer op amp is rated at 4V. Buffer op amp series numbers are indicated by the LinCMOS?.
TLV2332IP Features
8 Pins
supply voltage of 5V
104.61dB voltage gain
TLV2332IP Applications
There are a lot of Texas Instruments TLV2332IP Instrumentational OP Amps applications.
- Addition operation circuits
- Video conversion and routing
- Exponential operation circuits
- Power control
- Comparator
- Automotive sensors
- single/dual op amp sum and difference circuits
- Professional videography
- Switching amplifier
- Mobile phone
