TLV2352ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | TLV2352 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Nominal Supply Current | 300μA |
| Power Dissipation | 725mW |
| Output Current | 20mA |
| Max Supply Current | 125μA |
| Quiescent Current | 400μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 2V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Supply Voltage Limit-Max | 8V |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2352ID Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.There is a CMOS, MOS, Open-Drain, TTL output type for this comparator.As a result, it is designed with Tube package.There are8 terminals on the comparator.The electrical component in this case belongs to the Comparator family.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.This is a typical comparator of type Differential .In total, it contains 2 elements.The device is equipped with 8 pins.The recommended mounting type is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .There are 8 pins on the comparator.You may wish to search TLV2352 for more solutions that address your specific needs.The comparator displays a quiescent current of 400μA .There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 300μA .If the current supply exceeds 125μA , the comparator could malfunction.This part is from the LinCMOS? comparator series.A normal operation requires a voltage of 5V .
TLV2352ID Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 400μA
TLV2352ID Applications
There are a lot of Texas Instruments TLV2352ID linear comparators applications.
- General-Purpose Portable Devices
- Mobile Communications
- Analog front end
- Hand-Held Electronics
- Factory automation & control
- Laptop Computers
- Automotive
- Battery management and protection
- Mobile Phones
- Window Comparators
