TLV2352IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | TLV2352 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 125μA |
| Power Dissipation | 725mW |
| Output Current | 20mA |
| Max Supply Current | 125μA |
| Quiescent Current | 400μA |
| Response Time | 200 ns |
| Voltage - Supply, Single/Dual (±) | 2V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Supply Voltage Limit-Max | 8V |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2352IDR Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a CMOS, MOS, Open-Drain, TTL output.This package has been designed with Tape & Reel (TR) .The comparator has 8 terminals.The electrical component in this case belongs to the Comparator families.The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.Speaking of types, this is a typical Differential comparator.This element consists of 2 elements in total.A total of 8 pins are included.In general, mounting type Surface Mount is recommended.In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .There are 8 pins on the comparator.Search TLV2352 to find more pin-to-pin solutions.There is 400μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Normal operation of the device requires 125μA supply current.A current supply greater than 125μA may cause the comparator to malfunction.There is sufficient power to run the device from 3/5V power supplies.The part is based on LinCMOS? .The device is packed in TR and is intended for general use (as an element in the ADC circuit).
TLV2352IDR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 400μA
TLV2352IDR Applications
There are a lot of Texas Instruments TLV2352IDR linear comparators applications.
- Set Top Boxes
- Security Detection Systems
- Window Comparators, Multivibrators
- Window Comparators
- Multivibrators and High-Voltage Digital Logic Gates
- System control and monitoring
- Battery management and protection
- Alarm and Monitoring Circuits
- Self-diagnostics
- DC/DC and AC/DC power supplies
