TLV2352IP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | TLV2352 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Power Supplies | 3/5V |
| Number of Circuits | 2 |
| Nominal Supply Current | 125μA |
| Power Dissipation | 1W |
| Output Current | 20mA |
| Max Supply Current | 125μA |
| Quiescent Current | 400μA |
| Response Time | 200 ns |
| Voltage - Supply, Single/Dual (±) | 2V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Supply Voltage Limit-Max | 8V |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Current - Output (Typ) | 20mA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2352IP Overview
In order to make transportation easier, it is packaged in 8-DIP (0.300, 7.62mm) .There is a comparator of type CMOS, MOS, Open-Drain, TTL output on this device.We ship the part through Tube .There are8 terminals on the comparator.Electronic comparator is a component of the Comparator family.When supplied with 3V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical Differential comparator.As a result, it contains 8 pins.The type of mounting recommended is Through Hole .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.8 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TLV2352 .This comparator presents a quiescent current of 400μA .A Through Hole is provided for mounting it onto a PCB or another board.For normal use of the device, the nominal supply current should be 125μA .An excess of current supply over 125μA could result in malfunction of the comparator.In order to operate the device, 3/5V power supplies are sufficient.In this case, the part is from the LinCMOS? comparator series.
TLV2352IP Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Operates under -40°C~85°C
Quiescent Current: 400μA
TLV2352IP Applications
There are a lot of Texas Instruments TLV2352IP linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Handheld Instruments
- Wireless Base Stations
- Current and voltage sensing
- Consumer Medical Electronics
- Battery-Powered Electronics
- Notebooks and PDAs
- General-Purpose Portable Devices
- Battery management and protection
- Building automation
