TLV2352IPW
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 525mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV2352 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 300μA |
| Power Dissipation | 525mW |
| Output Current | 20mA |
| Max Supply Current | 300μA |
| Quiescent Current | 400μA |
| Response Time | 200 ns |
| Voltage - Supply, Single/Dual (±) | 2V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Supply Voltage Limit-Max | 8V |
| Max Input Current | 5pA |
| Input Bias Current | 2nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
TLV2352IPW Overview
The product is packaged in 8-TSSOP (0.173, 4.40mm Width) to facilitate transportation.A comparator with an output type of CMOS, MOS, Open-Drain, TTL is being used.Ready for shipping in Tube package.The comparator has 8 terminals.Electronic comparator is a part of Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 3V voltage.When it comes to types, this comparator is a typical Differential .There are a total of 2 elements in it.There are 8 pins on this board.A Surface Mount mounting type is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.Electronic comparator has 8 pins.You may wish to search TLV2352 for more solutions that address your specific needs.There is a quiescent current of 400μA in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be 300μA .If the current supply exceeds 300μA , the comparator could malfunction.The device can be powered by 3/5V power supplies.Input current to the device is limited to 5pA .Comparator electronics is a comparator part from the LinCMOS? series.
TLV2352IPW Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 400μA
TLV2352IPW Applications
There are a lot of Texas Instruments TLV2352IPW linear comparators applications.
- Security Detection Systems
- General-Purpose, Low-Voltage Applications
- Point of load regulators
- Window Comparators
- Wearable Devices
- Portable and Battery-Powered Systems
- Portable Battery Monitoring
- Infotainment & cluster
- Consumer Medical Electronics
- Automotive
