TLV2352IPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 525mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLV2352 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 300μA |
| Power Dissipation | 525mW |
| Output Current | 20mA |
| Max Supply Current | 125μA |
| Quiescent Current | 400μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 2V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Supply Voltage Limit-Max | 8V |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2352IPWR Overview
The product is packaged in 8-TSSOP (0.173, 4.40mm Width) in order to facilitate transportation.Output type of this comparator is CMOS, MOS, Open-Drain, TTL .As a result, it is designed with Cut Tape (CT) package.The comparator has 8 terminals.Electronic comparator is a component of the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 3V voltage.When it comes to types, this comparator is a typical Differential .Electronic comparator has a total of 2 elements.The pinout of the component starts from 8 pins it has.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.The comparator consists of 8 pins.You may wish to search TLV2352 for more solutions that address your specific needs.As a result, this comparator displays a quiescent current of 400μA .The board has a Surface Mount for mounting on a PCB or any other board.Normal use of the device should require a nominal supply current of 300μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 125μA .This device requires 3/5V power supplies to operate.Electronic comparator is possible to input a maximum current of 5pA into the device.In this case, the part is from the LinCMOS? comparator series.This device is usually used in ADC circuits (packaged in TR ).
TLV2352IPWR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 400μA
TLV2352IPWR Applications
There are a lot of Texas Instruments TLV2352IPWR linear comparators applications.
- Alarm and Monitoring Circuits
- General-Purpose, Low-Voltage Applications
- Motor drives
- Power management
- Window Comparators
- Limit Comparators
- Mobile Phones and Tablets
- Appliances
- DC/DC and AC/DC power supplies
- RC Timers
