Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Weight |
133.412856mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
LinCMOS™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
Differential |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Max Power Dissipation |
950mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
3V |
Terminal Pitch |
1.27mm |
Base Part Number |
TLV2354 |
Pin Count |
14 |
Output Type |
CMOS, MOS, Open-Drain, TTL |
Number of Elements |
4 |
Power Supplies |
3/5V |
Nominal Supply Current |
125μA |
Power Dissipation |
950mW |
Output Current |
20mA |
Max Supply Current |
125μA |
Quiescent Current |
800μA |
Response Time |
200 ns |
Voltage - Supply, Single/Dual (±) |
2V~8V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.002μA |
Supply Voltage Limit-Max |
8V |
Max Input Current |
5pA |
Input Bias Current |
2nA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
5pA @ 5V |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV2354IDR Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.The comparator has a type CMOS, MOS, Open-Drain, TTL output.The part is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 14 terminals of the comparator.The component belongs to the Comparator family of electrical components.In the presence of a 3V voltage, the comparator is capable of accomplishing a variety of demanding tasks.When it comes to types, this comparator is a typical Differential .There are a total of 4 elements in it.The device includes 14 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.The comparator is equipped with 14 pins.In order to find a solution that meets your specific needs, search TLV2354 for more pin-to-pin solutions.There is a quiescent current of 800μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 125μA .If the current supply exceeds 125μA , the comparator could malfunction.The device can be run with 3/5V power supplies.The maximal current your can input into the device is 5pA .A comparator part from the LinCMOS? series is used in this part.Often found in ADC circuits, this device is packed in TR .
TLV2354IDR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 800μA
TLV2354IDR Applications
There are a lot of Texas Instruments TLV2354IDR linear comparators applications.
- DC/DC and AC/DC power supplies
- RC Timers
- Set Top Boxes
- Zero-Crossing Detectors
- Power management
- Window Comparators, Multivibrators
- Portable Battery Monitoring
- General-Purpose, Low-Voltage Applications
- Notebooks and PDAs
- Motor drives