TLV2354IPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 700mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Base Part Number | TLV2354 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 125μA |
| Power Dissipation | 700mW |
| Output Current | 20mA |
| Max Supply Current | 125μA |
| Quiescent Current | 800μA |
| Response Time | 200 ns |
| Voltage - Supply, Single/Dual (±) | 2V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Supply Voltage Limit-Max | 8V |
| Max Input Current | 5pA |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2354IPWR Overview
To facilitate transportation, it comes packaged in 14-TSSOP (0.173, 4.40mm Width) .Output type of this comparator is CMOS, MOS, Open-Drain, TTL .The part will be shipped by Cut Tape (CT) .The comparator has a total of 14 terminals.The component belongs to the Comparator family of electrical components.Supplied by 3V voltage, the comparator can accomplish the many demanding tasks.In general, the chip type can be classified as Differential .There are a total of 4 elements in it.The pinout of the component starts from 14 pins it has.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator has 14 pins.Search TLV2354 to find more pin-to-pin solutions.A quiescent current of 800μA is displayed by this comparator.The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires 125μA supply current.If the current supply exceeds 125μA , the comparator could malfunction.In order to operate the device, 3/5V power supplies are sufficient.Input current to the device cannot exceed 5pA .This part is from the LinCMOS? comparator series.Packed in TR , this device is for general uses (often in ADC circuits).
TLV2354IPWR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 800μA
TLV2354IPWR Applications
There are a lot of Texas Instruments TLV2354IPWR linear comparators applications.
- Mobile Phones
- General-Purpose Portable Devices
- Mobile Communications
- Automotive
- Current and voltage sensing
- Building automation
- Hand-Held Electronics
- Mobile Phones and Tablets
- Infotainment and Clusters
- RC Timers
