TLV2361CDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Base Part Number | TLV2361 |
| Pin Count | 5 |
| Number of Elements | 1 |
| Operating Supply Current | 1.75mA |
| Nominal Supply Current | 2.5mA |
| Output Current | 20mA |
| Slew Rate | 3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | ±1V~2.5V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 6MHz |
| Gain Bandwidth Product | 7MHz |
| Neg Supply Voltage-Nom (Vsup) | -1.5V |
| Unity Gain BW-Nom | 7000 kHz |
| Voltage Gain | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 6MHz |
| Max I/O Voltage | 6mV |
| Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2361CDBVR Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. General Purpose-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Cut Tape (CT) case. The number of terminations is approaching the 5 mark. A total of 5 pins are located on this board. This linear amplifier should be powered by an 1.5V battery. It should be noted that this op amp is a type of Operational Amplifier device. An 5-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 6mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . This op amp can operate from a supply current at 1.75mA. 80dB should remain the voltage gain. It is possible to count 1 elements on this buffer amplifier. To pack the operational amplifier ics, TR is adopted as the packing method.
TLV2361CDBVR Features
5 Pins
supply voltage of 1.5V
80dB voltage gain
TLV2361CDBVR Applications
There are a lot of Texas Instruments TLV2361CDBVR Instrumentational OP Amps applications.
- Home audio systems
- Communication device
- Strain gauges
- Non-polarized electrodes
- Instrumentation
- Displayers for aircraft and air transportation control systems
- Medical imaging
- Blood pressure sensors
- Power control
- High-frequency data acquisition systems
