TLV2361CDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Base Part Number | TLV2361 |
| Pin Count | 5 |
| Operating Supply Voltage | 2.5V |
| Number of Circuits | 1 |
| Operating Supply Current | 1.75mA |
| Nominal Supply Current | 2.5mA |
| Output Current | 20mA |
| Slew Rate | 3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | ±1V~2.5V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 6MHz |
| Gain Bandwidth Product | 7MHz |
| Neg Supply Voltage-Nom (Vsup) | -1.5V |
| Unity Gain BW-Nom | 7000 kHz |
| Voltage Gain | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 6MHz |
| Max I/O Voltage | 6mV |
| Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2361CDBVT Overview
Packaging for the buffer amplifier is in the form of a SC-74A, SOT-753 case. General Purpose-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 5. In this case, there are 5 pins on the board. It is important to remember that this op amp should be operated at a voltage of 1.5V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. Linear amplifier includes 5 pins. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . An 1.75mA volt supply current is needed for this linear amplifier to operate. 80dB should remain the voltage gain. This op amp ic has 1 circuits. The operating supply voltage of instrumentation amplifier is rated 2.5V voltage. To pack the operational amplifier ics, TR is adopted as the packing method.
TLV2361CDBVT Features
5 Pins
supply voltage of 1.5V
80dB voltage gain
TLV2361CDBVT Applications
There are a lot of Texas Instruments TLV2361CDBVT Instrumentational OP Amps applications.
- Medical instruments
- Tablets
- Fast A/D and D/A converters
- Cinema or auditorium audio system
- Wireless base stations
- Measurements of Wheatstone bridge
- single/dual op amp sum and difference circuits
- High input resistance broadband
- Active probe
- Differentiator circuits
