TLV2361IDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Base Part Number | TLV2361 |
| Pin Count | 5 |
| Operating Supply Voltage | 2.5V |
| Number of Circuits | 1 |
| Operating Supply Current | 1.75mA |
| Nominal Supply Current | 2.5mA |
| Output Current | 20mA |
| Slew Rate | 3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | ±1V~2.5V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 6MHz |
| Gain Bandwidth Product | 7MHz |
| Neg Supply Voltage-Nom (Vsup) | -1.5V |
| Unity Gain BW-Nom | 7000 kHz |
| Voltage Gain | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 6MHz |
| Max I/O Voltage | 6mV |
| Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2361IDBVT Overview
A SC-74A, SOT-753 case is used to package the op amp. The instrumentation amplifier in this picture is of the General Purpose-type. Linear amplifier is delivered in a Tape & Reel (TR) case. There have been a total of 5 terminations over the past year. In this case, there are 5 pins on the board. It is important to remember that this op amp should be operated at a voltage of 1.5V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 5 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 1mV. Surface Mount is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using an 1.75mA supply current, this operational amplifier ics can be operated. It is a member of the 80dB's 80dB family. In total, there are 1 circuits on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 2.5V voltage. A TR-shaped amplifier is used to pack the buffer amps.
TLV2361IDBVT Features
5 Pins
supply voltage of 1.5V
80dB voltage gain
TLV2361IDBVT Applications
There are a lot of Texas Instruments TLV2361IDBVT Instrumentational OP Amps applications.
- Communication
- Image computer boards
- High speed sample
- Displayers for aircraft and air transportation control systems
- Navigation
- Scintillation detectors
- Professional videography
- Strain gauges
- Proportional operation circuits
- High/low-pass filter circuit
