TLV2362ID
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.5V |
| Base Part Number | TLV2362 |
| Pin Count | 8 |
| Operating Supply Voltage | 2.5V |
| Number of Channels | 2 |
| Operating Supply Current | 1.75mA |
| Nominal Supply Current | 5mA |
| Output Current | 20mA |
| Slew Rate | 3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | ±1V~2.5V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 6MHz |
| Gain Bandwidth Product | 7MHz |
| Neg Supply Voltage-Nom (Vsup) | -1.5V |
| Unity Gain BW-Nom | 7000 kHz |
| Voltage Gain | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 3.5V |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.15μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 6MHz |
| Max I/O Voltage | 6mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
TLV2362ID Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. A General Purpose-type buffer amplifier is shown here. Linear amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. A total of 8 pins are attached to buffer op amp. Please take in mind that op amp should be run at 1.5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 6mV. Surface Mount is the recommended mounting type of operational amplifiers. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. An 1.75mA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 60dB. Instrumentation amplifier has 2 channels on it. The operating supply voltage of the buffer op amp is rated at 2.5V.
TLV2362ID Features
8 Pins
supply voltage of 1.5V
60dB voltage gain
TLV2362ID Applications
There are a lot of Texas Instruments TLV2362ID Instrumentational OP Amps applications.
- Broadcasting
- Power control
- Power transmission
- Subtraction operation circuits
- Laptop
- Signal transformation
- High gain DC amplifier
- Video amplifiers
- Ultrasound transducers
- Large motor controllers
