TLV2362IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.5V |
| Base Part Number | TLV2362 |
| Pin Count | 8 |
| Operating Supply Voltage | 2.5V |
| Number of Elements | 2 |
| Operating Supply Current | 1.75mA |
| Nominal Supply Current | 5mA |
| Output Current | 20mA |
| Slew Rate | 3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | ±1V~2.5V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 6MHz |
| Gain Bandwidth Product | 7MHz |
| Neg Supply Voltage-Nom (Vsup) | -1.5V |
| Unity Gain BW-Nom | 7000 kHz |
| Voltage Gain | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 3.5V |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.15μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 6MHz |
| Max I/O Voltage | 6mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2362IDR Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Cut Tape (CT) case. There have been a total of 8 terminations over the past year. It consists of a total of 8 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 1.5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. There are 8 pins on this chip. There is an input offset voltage of 6mV for this buffer op amp. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. As long as the supply current of the chip does not exceed 1.75mA, this op amp ic can operate. Keeping the voltage gain at 60dB is the best course of action. There are 2 elements in this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 2.5V voltage. A TR-shaped amplifier is used to pack the buffer amps.
TLV2362IDR Features
8 Pins
supply voltage of 1.5V
60dB voltage gain
TLV2362IDR Applications
There are a lot of Texas Instruments TLV2362IDR Instrumentational OP Amps applications.
- Radiation thermometry transducers
- Professional videography
- Differentiator circuits
- High/low-pass filter circuit
- PDA
- Video amplifiers
- Ultrasound transducers
- Home audio systems
- RF cable systems
- Proportional operation circuits
