TLV2370IDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TLV2370 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Number of Channels | 1 |
| Operating Supply Current | 750μA |
| Nominal Supply Current | 900μA |
| Power Dissipation | 385mW |
| Output Current | 16mA |
| Slew Rate | 2.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 4.5mV |
| Bandwidth | 2.4MHz |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 110dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 4.5mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2370IDBVR Overview
There is a SOT-23-6 case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the General Purpose-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. During the past two weeks, there have been close to 6 terminations. A total of 6 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. A total of 6 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 4.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~125°C. Using a supply current of 750μA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 110dB. 1 channels are available on the instrumentation amplifier. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 8V. An buffer amplifier is packed in a TR-shape according to the design.
TLV2370IDBVR Features
6 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
TLV2370IDBVR Applications
There are a lot of Texas Instruments TLV2370IDBVR Instrumentational OP Amps applications.
- Polarized electrodes
- Radiation thermometry transducers
- Micro signal measurement
- Power transmission
- Video conversion and routing
- Signal operation
- Mobile phone
- Commercial audio systems
- Inverse/same-phase proportional circuit
- Precision measurement
