TLV2371IDBVR
| Parameters | |
|---|---|
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 4.5mV |
| Bandwidth | 2.4MHz |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 4.5mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV2371 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Number of Channels | 1 |
| Operating Supply Current | 750μA |
| Nominal Supply Current | 900μA |
| Power Dissipation | 385mW |
| Output Current | 16mA |
| Slew Rate | 2.1V/μs |
TLV2371IDBVR RRIO Op-Amp Description
The rail-to-rail input and output capability of the TLV2371 single-supply operational amplifier are provided. The TLV237x reduces the minimum operating supply voltage over the extended industrial temperature range to 2.7 V while adding a rail-to-rail output swing. The TLV2371 also offers 3-MHz bandwidth from 550 A. The maximum recommended supply voltage is 16 V, allowing the devices to be powered by a wide range of rechargeable cells (from 8 V to 1.35 V).
The CMOS inputs allow for use in high-impedance sensor interfaces, and the lower voltage operation makes the TLC227x an ideal choice for battery-powered applications. The rail-to-rail input stage expands its versatility even further. The TLV237x is the seventh member of TI's rapidly expanding line of RRIO products, and it is the first to support up to 16-V rails with good ac performance.
TLV2371IDBVR RRIO Op-Amp Features
Supply Voltage Range: 2.7 V ~ 16 V
Industrial Grade Temperature Range: ?40°C ~ +125°C
High Slew Rate: 2.4 V/μs
Input Noise Voltage: 39 nV/√Hz
Wide Bandwidth: 3 MHz
Supply Current: 550 μA/Channel
Ultra-Small Packaging
Rail-to-Rail Input and Output
Input Bias Current: 1 pA
TLV2371IDBVR RRIO Op-Amp Applications
Portable Blood Glucose Systems
White Goods
Active Filters
Battery-Powered Electronics
Remote Sensing
Handheld Test Equipment
Industrial Automation
