TLV2372IDGKG4

2 Channels 16mA per Channel 1pA 50 dB Instrumentational OP Amps 0.00006μA 8V 2.7V~16V ±1.35V~8V TLV2372 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2372IDGKG4
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 165
Description: 2 Channels 16mA per Channel 1pA 50 dB Instrumentational OP Amps 0.00006μA 8V 2.7V~16V ±1.35V~8V TLV2372 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.7V~16V ±1.35V~8V
Output Current per Channel	16mA
Input Offset Voltage (Vos)	4.5mV
Bandwidth	3MHz
Unity Gain BW-Nom	3000 kHz
Voltage Gain	110dB
Average Bias Current-Max (IIB)	0.00006μA
Power Supply Rejection Ratio (PSRR)	70dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	2mV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Dual Supply Voltage	5V
Nominal Gain Bandwidth Product	3MHz
Max I/O Voltage	4.5mV
Input Offset Current-Max (IIO)	0.00006μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Max Power Dissipation	481mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	TLV2372
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	8V
Number of Channels	2
Operating Supply Current	750μA
Nominal Supply Current	1.8mA
Power Dissipation	481mW
Output Current	16mA
Slew Rate	2.1V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	50 dB

TLV2372IDGKG4 Overview

There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. This linear amplifier should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are located on the operational amplifiers. Regarding input offset voltage, op amp rates 4.5mV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~125°C. Using a supply current of 750μA , this buffer op amp will be able to operate. 110dB should remain the voltage gain. Buffer op amp is equipped with 2 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 8V.