TLV2372IP

2 Channels 16mA per Channel 1pA 50 dB Instrumentational OP Amps 0.00006μA 8V 2.7V~16V ±1.35V~8V TLV2372 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2372IP
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 383
Description: 2 Channels 16mA per Channel 1pA 50 dB Instrumentational OP Amps 0.00006μA 8V 2.7V~16V ±1.35V~8V TLV2372 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Base Part Number	TLV2372
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	8V
Number of Channels	2
Operating Supply Current	750μA
Nominal Supply Current	1.8mA
Power Dissipation	1.2W
Output Current	16mA
Slew Rate	2.1V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	50 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.7V~16V ±1.35V~8V
Output Current per Channel	16mA
Input Offset Voltage (Vos)	4.5mV
Bandwidth	3MHz
Unity Gain BW-Nom	3000 kHz
Voltage Gain	110dB
Average Bias Current-Max (IIB)	0.00006μA
Power Supply Rejection Ratio (PSRR)	70dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	2mV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Dual Supply Voltage	5V
Nominal Gain Bandwidth Product	3MHz
Max I/O Voltage	4.5mV
Input Offset Current-Max (IIO)	0.00006μA
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	5V

TLV2372IP Overview

In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. Buffer amps of this type are called General Purpose-types. Instrumentation amplifier is delivered in a Tube case. A total of 8 terminations have been reported in the past few weeks. In this case, there are 8 pins on the board. I would like to remind you that this buffer op amp should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. There are 8 pins on this chip. In terms of input offset voltage, operational amplifier rates 4.5mV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. Using an 750μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 110dB for the time being. As far as the device is concerned, buffer amplifier has 2 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of the buffer op amp is rated at 8V.