Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TLV2373 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
8V |
Number of Channels |
2 |
Operating Supply Current |
750μA |
Nominal Supply Current |
1.8mA |
Power Dissipation |
1.022W |
Output Current |
16mA |
Slew Rate |
2.1V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
50 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
2.7V~16V ±1.35V~8V |
Output Current per Channel |
16mA |
Input Offset Voltage (Vos) |
4.5mV |
Bandwidth |
2.4MHz |
Unity Gain BW-Nom |
3000 kHz |
Voltage Gain |
110dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Power Supply Rejection Ratio (PSRR) |
70dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
2mV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Dual Supply Voltage |
5V |
Nominal Gain Bandwidth Product |
3MHz |
Max I/O Voltage |
4.5mV |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV2373ID Overview
Packaging for the buffer amplifier is in the form of a 14-SOIC (0.154, 3.90mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. The number of terminations approaches 14. The pins on this board total to 14 in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 14 pins on it. There is an input offset voltage of 4.5mV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, this op amp functions well at -40°C~125°C. As long as the supply current of the chip does not exceed 750μA, this op amp ic can operate. It is recommended to keep the voltage gain at 110dB at all times. Instrumentation amplifier has 2 channels on it. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of the buffer op amp is rated at 8V.
TLV2373ID Features
14 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
TLV2373ID Applications
There are a lot of Texas Instruments TLV2373ID Instrumentational OP Amps applications.
- Exponential operation circuits
- Signal operation
- Industrial control system
- Automation control systems
- Fission chambers
- Blood pressure sensors
- Test equipment
- Video conversion and routing
- pH (acidity)
- Weak signal detection