Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Base Part Number |
TLV2374 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
8V |
Power Supplies |
+-1.35/+-8/2.7/16V |
Number of Channels |
4 |
Operating Supply Current |
750μA |
Nominal Supply Current |
3.6mA |
Power Dissipation |
720mW |
Output Current |
16mA |
Slew Rate |
2.1V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
50 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
2.7V~16V ±1.35V~8V |
Output Current per Channel |
16mA |
Input Offset Voltage (Vos) |
4.5mV |
Bandwidth |
3MHz |
Unity Gain BW-Nom |
3000 kHz |
Voltage Gain |
110dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Power Supply Rejection Ratio (PSRR) |
70dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
2mV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Dual Supply Voltage |
5V |
Nominal Gain Bandwidth Product |
3MHz |
Max I/O Voltage |
4.5mV |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV2374IPWG4 Overview
The linear amplifier is packaged in a 14-TSSOP (0.173, 4.40mm Width) case which makes it easy for the consumer to handle. Buffer amps of this type are called General Purpose-types. The op amp is delivered to you in a Tube case. The number of terminations approaches 14. It consists of a total of 14 pins in total. This linear amplifier should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. A total of 14 pins are present on the instrumentation amplifier. Op amp rates 4.5mV as input offset voltage. This electronic part is recommended for mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . An 750μA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 110dB. Instrumentation amplifier has 4 channels on it. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 8V.
TLV2374IPWG4 Features
14 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
TLV2374IPWG4 Applications
There are a lot of Texas Instruments TLV2374IPWG4 Instrumentational OP Amps applications.
- Band-pass filter
- Video computer boards
- Oscilloscopes
- Addition operation circuits
- Automotive sensors
- Biopotential
- Power transmission
- Band-stop filter
- E-book readers
- Precision measurement