TLV2374QDRG4Q1

4 Channels 16mA per Channel 1pA 50 dB Instrumentational OP Amps 0.00006μA 8V 2.7V~16V ±1.35V~8V TLV2374 14 Pins 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TLV2374QDRG4Q1
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 238
Description: 4 Channels 16mA per Channel 1pA 50 dB Instrumentational OP Amps 0.00006μA 8V 2.7V~16V ±1.35V~8V TLV2374 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Base Part Number	TLV2374
Pin Count	14
Output Type	Rail-to-Rail
Operating Supply Voltage	8V
Power Supplies	+-1.35/+-8/2.7/16V
Number of Channels	4
Operating Supply Current	750μA
Nominal Supply Current	3.6mA
Output Current	16mA
Slew Rate	2.1V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	50 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.7V~16V ±1.35V~8V
Output Current per Channel	16mA
Input Offset Voltage (Vos)	4.5mV
Bandwidth	3MHz
Unity Gain BW-Nom	3000 kHz
Voltage Gain	110dB
Average Bias Current-Max (IIB)	0.00006μA
Power Supply Rejection Ratio (PSRR)	70dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	16.5V
Voltage - Input Offset	2mV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Nominal Gain Bandwidth Product	2.4MHz
Max I/O Voltage	4.5mV
Input Offset Current-Max (IIO)	0.00006μA
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TLV2374QDRG4Q1 Overview

A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 14 terminations. There are a total of 14 pins on this op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 14 pins are present on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 4.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureYou can run this op amp ic on 750μA . It is recommended to keep the voltage gain at 110dB at all times. There are a total of 4 channels available on the op amps. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of instrumentation amplifier is rated 8V voltage. A TR-shaped amplifier is used to pack the buffer amps. Automotive, AEC-Q100 is the number that corresponds to the series of the buffer op amp.