Parameters |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
TLV2375 |
Pin Count |
16 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
8V |
Number of Elements |
4 |
Operating Supply Current |
750μA |
Nominal Supply Current |
3.6mA |
Power Dissipation |
1.09W |
Output Current |
16mA |
Slew Rate |
2.1V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
50 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
2.7V~16V ±1.35V~8V |
Output Current per Channel |
16mA |
Input Offset Voltage (Vos) |
4.5mV |
Bandwidth |
2.4MHz |
Unity Gain BW-Nom |
3000 kHz |
Voltage Gain |
110dB |
Average Bias Current-Max (IIB) |
0.00006μA |
Power Supply Rejection Ratio (PSRR) |
70dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
2mV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
3MHz |
Max I/O Voltage |
4.5mV |
Input Offset Current-Max (IIO) |
0.00006μA |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
TLV2375IDR Overview
There is a 16-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. General Purpose-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 16 terminations this year. A total of 16 pins are located on this board. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 16 pins are located on the operational amplifiers. Regarding input offset voltage, op amp rates 4.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. You can run this op amp ic on 750μA . Keeping the voltage gain at 110dB is the best course of action. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. It is possible to count 4 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 8V voltage. For the packing of the instrumentation amplifier, TR is adopted.
TLV2375IDR Features
16 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
TLV2375IDR Applications
There are a lot of Texas Instruments TLV2375IDR Instrumentational OP Amps applications.
- PDA
- Video computer boards
- MP3
- Wireless base stations
- Band-stop filter
- RF cable systems
- Ultrasound transducers
- Logarithmic operation circuits
- E-book readers
- Strain gauges