banner_page

TLV2381ID

1 Channels 400μA per Channel 1pA 54 dB Instrumentational OP Amps 8V 2.7V~16V ±1.35V~8V TLV2381 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLV2381ID
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 204
  • Description: 1 Channels 400μA per Channel 1pA 54 dB Instrumentational OP Amps 8V 2.7V~16V ±1.35V~8V TLV2381 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology BIMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number TLV2381
Pin Count 8
Output Type Rail-to-Rail
Operating Supply Voltage 8V
Number of Channels 1
Operating Supply Current 7μA
Nominal Supply Current 10μA
Power Dissipation 710mW
Output Current 400μA
Slew Rate 0.06V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 54 dB
Current - Input Bias 1pA
Voltage - Supply, Single/Dual (±) 2.7V~16V ±1.35V~8V
Output Current per Channel 400μA
Input Offset Voltage (Vos) 4.5mV
Bandwidth 160 kHz
Unity Gain BW-Nom 160 kHz
Voltage Gain 100dB
Power Supply Rejection Ratio (PSRR) 74dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 500μV
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.00006μA
Programmable Power NO
Dual Supply Voltage 5V
Nominal Gain Bandwidth Product 160 kHz
Max I/O Voltage 4.5mV
Input Offset Current-Max (IIO) 0.00006μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLV2381ID Overview


The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Buffer amps of this type are called General Purpose-types. A Tube case is used for delivering the op amp. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 4.5mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. You can run this op amp ic on 7μA . Voltage gain should remain at 100dB. On the buffer amps, there are 1 channels that can be used. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 8V.

TLV2381ID Features


8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail

TLV2381ID Applications


There are a lot of Texas Instruments TLV2381ID Instrumentational OP Amps applications.

  • Broadcasting
  • Fast A/D and D/A converters
  • Automotive sensors
  • pH (acidity)
  • Proportional counter tubes
  • earphone
  • Portable electronic products powered by batteries
  • Mobile phone
  • Automatic control
  • Signal amplification

Write a review

Note: HTML is not translated!
    Bad           Good